P1Wax Grade HV3

Technical datasheet

Product Description

P1Wax Grade HV3 is a high viscosity, low molecular weight homopolymer polyethylene wax in flake form, produced in Thailand under the standard control to ensure consistent product quality.

It is used in a broad range of applications, including filler dispersants, slip agents and mold release agents for molding resins, shortening of setting time, improve heat resistance and reduction of blend viscosity in hot melt adhesive and thermoplastic road marking.

Packing

P1WAX^TM is offered in multi package types. The standard type is 25 kg PP bag on pallet, 1.2 mt per pallet, 12 mt per 20’ container, 24 mt per 40’ container. (HS Code 34049000). See your P1WAX sales representative for packaging offerings and availability.

Storage

This product should be store in dry and dust free location at temperature below 50 ^oC and protected from moisture, contamination, direct sunlight and/or heat, well-ventilated area. The useful life of this product can be affected by storage and handling conditions.

PROPERTIES	STANDARD	UNIT	HV3
Apperance			White Flake
Viscosity (149 °C)	ASTM D3236	cPs	1000-1500
Dropping point	ASTM D3954	°C	113
Penetration	ASTM D1321	dmm	≤ 4
Density	ASTM D1505	g/cm3	0.92

Note: the given values are typical value measured on the product, not to be constructed as product specification.

Application	Guide	Key benefit
Hot melt adhesive	20-30%	Reduction of blend viscosity, shortening of setting time, and improve heat resistance
Thermoplastic road marking	1-3%	Reduction of blend viscosity, and improve heat resistance
Filler Masterbatch	5-8%	Improve filler dispersion
PVC compound	0.5-1.5 phr	Reduce the adhesion between PVC and metal surface (external lubricant in Rigid PVC)
Rubber	2-10%	Improve processability and additives dispersants.
Candle	1-5%	Improve gloss, hardness and prolong candle life.
Wax blends	3-5%	Improve softening point and hardness

Disclaimer: The applications specified herein is for reference only. It is customer’s responsibilities to inspect and test the product for suitability of the customer’s own use and purpose. The customer is responsible for appropriate, safe, legal use, processing and handling of the product. To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication. We however do not assume any liability whatsoever for the accuracy and completeness of the information contained herein.